User Tools

Site Tools


hmv_music_centre_45254

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
hmv_music_centre_45254 [2024/05/23 18:12] – compact_cassette page link rjthmv_music_centre_45254 [2025/09/04 03:33] (current) – note on not finding and speed adjust pots rjt
Line 5: Line 5:
 Turntable, [[compact_cassette|tape]] player/recorder, radio and amp. all-in-one. Originally seems to have come as a set with two speakers. Apparently quadraphonic. Has screw connections for rear speakers, and mine came with a quadraphonic-capable (shibata) stylus. Turntable, [[compact_cassette|tape]] player/recorder, radio and amp. all-in-one. Originally seems to have come as a set with two speakers. Apparently quadraphonic. Has screw connections for rear speakers, and mine came with a quadraphonic-capable (shibata) stylus.
  
-Belt driven. No fine speed adjustment. Just 33 and 45 RPM. Mine plays a bit slow. Subplatter diameter is 205mm.+Belt driven. No fine speed adjustment. Just 33 and 45 RPM. No pots for speed setting I could find looking under the platter or by removing the base, maybe something if you really want to dig in there. Mine plays a bit slow. Subplatter diameter is 205mm.
  
 Not sure if the cartridge is the original supplied, and there is no serial number on it. Not sure if the cartridge is the original supplied, and there is no serial number on it.
Line 13: Line 13:
 According to [[https://www.audio-technica.com/en-gb/support/which-stylus-can-i-use-to-replace-my-discontinued-model/|this page]] can be replaced with any VMN model stylus. According to [[https://www.audio-technica.com/en-gb/support/which-stylus-can-i-use-to-replace-my-discontinued-model/|this page]] can be replaced with any VMN model stylus.
  
-Went to fit a Nagaoka cartridge to it, but it doesn't fit on the headshell I have, because the finger lift is screwed onto the side, and an earth wire is soldered onto that. Would probably just fit if the lift was removed.+Went to fit a Nagaoka cartridge to it, but it doesn't fit on the headshell I have, because the finger lift is screwed onto the side, and an earth wire is soldered onto that. Got it to fit by moving the lift.
  
 ===== See Also ===== ===== See Also =====
hmv_music_centre_45254.txt · Last modified: 2025/09/04 03:33 by rjt