====== Roland TR-8 ======
{{ media:image:hardware:tr-8_top.png?200}}
{{ media:image:hardware:tr-8_back.png?200}}

===== Notes =====
==== Flam ====
On a drum kit a //flam// is when you hit a drum with both sticks //almost// at the same time.

You can add //flams// on the TR-8 by holding ''TR-REC'' then hit the step you want to add it on.

Holding ''TR-REC'' and turning the dial will let you set the timing too. I think that's global for all //flams//.

==== Ghost Notes ====
//Ghost notes// are extra samples you can use for you selected drum. Depending on the kit you're using they can be really different. To use, just hold down the the instruments button (the one under the slider: ''BD'', ''SD'', ''LT'', etc.).

===== Kits =====

The 'DRUM SELECT' section lets you select different drums and drum kits (and effects; see §[[#Effects]]).

  - pink: 808
  - yellow: 909
  - pink: 808 (alternate)
  - orange: 707
  - blue: 727
  - yellow: 909 (alternate)

===== Effects =====
As well as using ''STEP'' to have reverb and delay only on certain steps, you can can limit them to certain instruments (very handy!). Press ''KIT'', then hold ''STEP'' on reverb or delay, then toggle things on and off with their buttons under the sliders.

You can also use different reverbs and delays. Go into instrument mode (''INST''), then press ''STEP'' in the reverb or delay areas.

===== Settings =====
To enter settings hold ''PTN SELECT'' when turning on, and keep held until it's booted.

==== Colours ====
Hold ''DEPTH'' and rotate the ''SCATTER'' dial to select from different colours for the lights. When selected let go of ''DEPTH'' and hit ''START/STOP''

  - Standard red, orange yellow, blue
  - Dimmer version of standard
  - Dimmed blue, purple, pink, peach
  - Two alternating brightness greens
  - Dimmed white, red, green, white
  - Dimmed pink, purple, peach, blue

==== MIDI Clock ====

When booted into settings, if the first button is unlit it will use it's own clock.

Press first button to sync to devices plugged into 'MIDI IN', or USB.

Also, if the second button is lit you can use the MIDI OUT like a MIDI THRU. This means it will pass-through MIDI signals from MIDI IN without effecting them. Usually hardware has ports for IN, OUT, and THRU.

I guess it always sends clock via MIDI OUT?

Press ''START/STOP'' to save any changes you make.

==== Volume ====

By the default the volume is boosted. I'd found myself getting lots of distortion.

You can disable the boost by deselecting Step 3 (AKA Low Tom).

==== See Also ====
  * [[yt>V1wlJe82VmI|Roland TR 8 boot mode, hidden functions part 1]] and [[yt>n-gKmdyuWTw|part 2]]

===== See Also =====
  * [[yt>d7n9-h4YNSk|Producer's Guide To... Roland TR 8]] - Nice intro video to using the TR-8
  * [[yt>elOpe5IYobk|Roland AIRA TR-8 Tutorial (Settings, Sequencing, FX, Sidechain)]] - Another one.
  * https://www.rolandcorp.com.au/blog/ultimate-guide-aira-tr-8

{{tag>hardware instrument music-making tool drum-machine guide Roland}}