Differences

This shows you the differences between two versions of the page.

--- korg_electribe_es-1 [2023/10/15 13:28] – Image, renaming guide rjt
+++ korg_electribe_es-1 [2023/10/15 21:44] (current) – [See Also] es12wav rjt
@@ Line 12: / Line 12: @@
   * 8- or 16-bit, 32KHz. .WAV or .AIFF. If you use a rate other than 32KHz playback speed will be distorted.
   * You can format the card in the ES-1. It's [[wp>File_Allocation_Table#FAT12|FAT-12]].
-  * If you get ''Er.3'' that means you're out of space.
+  * If you get ''Er.3'' when loading samples that means you're out of space.
-  * Actual sample space seems to be ~2.2MiB in my experience.
+    * Actual sample space seems to be ~2.2MiB in my experience.
   * You have to load each sample one-by-one!
@@ Line 24: / Line 24: @@
   - Make sure 'increment by' is '1' (should be default)
   - 'and after' field needs to have your file extension; so '.wav'
-  - Make sure 'Keep existing names' to 'No' (should be default)
+  - Make sure 'Keep existing names' is set to 'No' (should be default)
   - Hit 'Preview' to make sure things look right, then hit 'Rename' if they do.
@@ Line 54: / Line 54: @@
   * [[https://files.ryliejamesthomas.net/manuals/korg_electribe_es-1.pdf]]
   * https://www.synthmania.com/es-1.htm
-  * https://github.com/chris-roerig/es1-renamer
+  * [[github>chris-roerig/es1-renamer]]
+  * [[github>polluxsynth/es12wav]]
   * https://www.korg.com/us/support/download/product/1/102/
     * https://www.korg.com/us/support/download/software/1/102/3317/ - ELECTRIBE-S/ES1 to .WAV PC Utility.